| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Foam Fire Truck
Special vehicles equipped with various types of fire-fighting equipment or extinguishing agents.
Foam fire trucks are hung with special license plates.
The special part is composed of liquid tanks, pump chambers, equipment boxes, power output and transmission systems, pipeline systems, electrical systems, etc.
This vehicle is applicable to urban public security fire brigades, petrochemicals, factories and mines, forests, ports, docks and other departments.
It can fight fires independently.
It is particularly suitable for extinguishing fires of petroleum and other oils, and can also supply water and foam mixtures to the fire scene.
It is an essential equipment for petrochemical enterprises, oil terminals, airports and professional urban fire brigades.
| Cabin | 4x2 water/foam fire truck dongfeng fire fighting truck | ||
| Vehicle Main Dimensions | (L x W x H)mm | 8100X2496X3080 | |
| Wheel base (mm) | 4700 | ||
| Approach/Departure angle(°) | 19/24 | ||
| Weight in KGS | Tare Weight | 17200 | |
| Loading Capacity | 7300 | ||
| Max. driving speed(km/h) | 90 | ||
| Engine | Brand | DongFeng | |
| Model | B6.2NS6B230 | ||
| Type | 4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling | ||
| Horse Power(HP) | 230HP | ||
| Emission standard | Euro II | ||
| Gearbox | HW19710, 10 forwards & 2 reverse | ||
| Clutch | Reinforced diaphragm clutch, diameter 430mm | ||
| Steering Gear | Z F 8098,power steering, hydraulic steering with power assistance | ||
| Tire | 1315/80R22.5 All steel radial tire , 11 pieces including one spare tire | ||
| Brakes | Service brake: dual circuit compressed air brake Parking brake :(emergency brake): spring energy, compressed air operating on rear wheels Auxiliary brake: engine exhaust valve brake |
||
| Fire Fighting Tanker Body | |||
| Tank Volume | 6000-9000L | ||
| Foam Tanker Volume | 1000-2000L | ||
| Fire Pump Flow | 20L/S/1.0MPa 40L/S/1.0MPa | ||
| Fire Pump Distance | Water | >65m | |
| Foam | >60m | ||
| 1 | Box stru cture |
Frame welding, longitudinal and transverse anti oscillation plates are installed inside the tank to reduce the impact of water on the tank during vehicle operation; The front and rear wall panels of the tank are folded with trapezoidal reinforcement, which gives the tank sufficient strength and stiffness |
| 2 | Open the top of the tank and start immediately | Top mounted quick opening manhole for easy access for maintenance personnel. The design inside the tank prevents the water pump from absorbing water and forming vortices, which can affect the flow rate. |
| 3 | Tank internal device | There is a stainless steel float level indicator inside the tank, which can display the capacity of the fire extinguishing agent in the tank through the level gauge on the instrument panel; There is a drainage outlet with a ball valve at the bottom of the tank. |
| 4 | Tank body and mouth setting | The tank is equipped with one 76mm overflow pipe and one 76mm injection port on each side of the carriage, which is convenient for other vehicles to supply water and add liquid |
| 5 | Equipment | 1,Two mouth holes with quick locking and opening devices. 2,Two liquid level indicators. 3,2 sewage outlets with stainless steel ball valves. 4,2 water injection ports (one on each side) |
| 6 | welding technology | Welding is firm and reliable, and defects such as slag inclusion and virtual welding are removed and cleaned; After welding, a 24-hour hydrostatic test should be conducted on the tank body to ensure no leakage. |
| 7 | Water suction pipeline | The water pump is equipped with Φ A 150mm water inlet can absorb water from natural water sources, liquid tanks, and fire water reservoirs. Additionally, a conversion reducing interface can be added to connect the fire hydrant for water supply. The suction pipe is placed on the roof. 1 strip Φ The inlet of a 150mm butterfly valve is used to connect with a water tank. |
| 8 | Water outlet pipeline | One roof setting Φ 100mm water outlet fire monitor pipeline and control valve, using flexible joints; One on each side of the pump room Φ 80mm and 1 piece Φ 65mm manual ball valve controlled outlet. |
| 9 | Water injection pipeline | 1 set up in the pump room Φ 65mm water pump injection pipeline and control valve into the tank; There are 2 on both sides of the carriage Φ 65mm water injection pipe, capable of injecting water into the tank, with an internal buckle interface and a cover. |
| 10 | Discharge residual water pipeline | To protect the water pump and each ball valve, a residual water discharge pipeline has been installed in the pipeline, and each valve is equipped with a ball valve. |
| 11 | Cooling water pipeline | To protect the water pump and each ball valve, a residual water discharge pipeline has been installed in the pipeline, and each valve is equipped with a ball valve. |
| 12 | Fire monitor | Model: PL8/48 foam fire monitor (West) Flow rate: 60 (1/s) Range: Water ≥ 60m Pressure: 1.0MPa Location: Located at the top of the water tank. Control: Manual control with locking mechanism for easy operation. |
| 13 | Power take-off | Type: Full power sandwich power take-off Cooling method: forced water cooling Lubrication method: splash oil lubrication Control method: The power take-off is operated at the dashboard in the driver's cab, and the combination of the power take-off is convenient and stable, without any abnormal noise. |
Q1:May I know how soon I can get the machine after I transfer the deposit?
){kind=link}